办公室系列欧美精品

<output id="bxxdv"></output>

<nobr id="bxxdv"></nobr>

<rp id="bxxdv"><font id="bxxdv"></font></rp>

<dl id="bxxdv"><thead id="bxxdv"><meter id="bxxdv"></meter></thead></dl>

    <big id="bxxdv"></big>

    <video id="bxxdv"></video>
    <p id="bxxdv"><mark id="bxxdv"><th id="bxxdv"></th></mark></p>

    <meter id="bxxdv"></meter>

    返回

    AW8623DNR

    AW8623 Low Power F0 Detect and Tracking LRA/ERM Haptic Driver

    AW8623 is a single chip, low cost H-bridge haptic driver IC that integrates configurable overdrive and brake function, up to 8KB waveform memory, and supports real time playback, memory playback and hardware trigger playback with fast startup time. All these make it an ideal candidate for haptic driver.The internal F0 detect function can trace the actual F0 frequency after LRA delivered to customs or after LRA mounted in the mobile, which can keep a strong vibration under all circumstances.The software configurable automatic overdrive process incorporating with the internal waveform memory and a variety of playback modes makes the control of complex haptic effects economical, simple and flexible.AW8623 supplies Short Circuit Protection, Over-Temperature Protection and Under-Voltage Protection for robust operation.AW8623 features configurable automatically switch to standby mode to help reduce power consumption. The RSTN pin provides further power saving by fully shut down the whole device. The dedicated interrupt output pin can detect realtime FIFO status and the error status of the chip.

    產品特性

    l  1MHz I2C Bus Control (Address 0x5A)

    l  F0 detect option

    l  F0 tracking option

    l  Automatic Overdrive and Braking

    l  Resistance-Based LRA Diagnostics

    l  Drive signal monitor for LRA protect

    l  Drive Compensation Over Battery Discharge

    l  Integrated 8-KByte Internal Waveform Memory

    l  Up to 4-KByte configurable FIFO Interface

    l  Three playback mode:

    l  Real-time playback, memory playback and

    l  hardware trigger playback

    l  Support automatically switch to standby mode

    l  Standby current: 10μA

    l  Shutdown current: 0.5μA

    l  3V to 5.5V Supply Voltage Range

    l  Short-Circuit Protection, Over-Temperature

        Protection, Under-Voltage Protection

    l  DFN 3X3-10L package

    Datasheet

    Application note

    產品型號 文檔格式 大小 下載
    • Haptic Actuator Type
      Input Signal
      Max Output Voltage(V)
      SRAM (kB)
      CLK
      LRA Calibration
      Loading(Ω)
      Boost
      Startup Time (ms)
      Package (mm)
    • AW8623DNR

      ERM,LRA
      I2C 1TRIG
      5.5
      8(Compression \Demopression)
      -
      -
      0.4
      WBDFN 3X3-10L
    封裝形式 引腳數 長(mm) 寬(mm) 厚(mm) 引腳間距(mm) 散熱盤 文檔下載
    DFN 3.0×3.0×0.75 -10L 10 3.0 3.0 0.75 0.5 Y
    隱私政策 | 使用條款

    ? Copyright 2008-2021 上海艾為電子技術股份有限公司 |   滬ICP備10011954號??Powered by IT

    办公室系列欧美精品 国产精品毛片av一区二区三区,国产精品毛片一区二区,免费AV一区二区三区| 久久99精品久久久久久青青,国产一区二区三区在线视頻,亚洲AV无码一区二区乱子伦AS| 中文字幕人妻丝袜乱一区三区,国精品人妻无码一区二区三区,国产一区二区丝袜高跟鞋